G. DAM (DIGITAL ANSWERING MACHINE)
DAM/MESSAGE
If there is no message. If there is any message.
You Have 0 Msg | You have 3 Msg |
|
|
|
0 Unread Mesg | 2 Unread Mesg |
|
|
|
LCD Display |
|
|
|
|
| Msg 1 |
|
|
|
| 11/28 14 : 40 : 03 |
|
|
|
|
|
|
| OK |
|
|
|
|
|
| Msg 2 *Unread* | Msg 2 | ||
| 11/29 09 : 30 : 21 | Playing | ||
Use | or arrow |
|
| CANCEL |
|
| |||
|
|
| ||
|
|
| ||
key to switch among | DAM/MESSAGE | |||
| messages. | |||
Press OK button to listen to the messages and then system will return the previous page without showing “unread” indication.
Press CANCELbutton to delete the message
Press DAM/Message again to exit the DAM Mode. If there is any message left unread, LED will continue flashing.
H. DAM SETTING
Note**: Only “OK” key will save the OGM (out going message) in.
When you reboot the IP Phone, the OGM will restore to default message.
DAM SETTING <– Use 
or 
arrow key to choose setting
Note: After setting up, ‘OK’ have to be pressed in order to save the setting. When IP phone is turn off or reboot, OGM will restore to default message.
DAM Setting
OK
DAM Setting
After picking up the handset,
you can start to record the OGM.
OK
1.Rcord Message
Pickup Handset
After finish recording, press ‘OK’
DAM Setting 2.Check Message
OK
Play the OGM then goes back
to “2.Check Message” again
DAM Setting 3.Enable/Disable
OK
If DAMis enable, LED is ON while
DAM Function
there is unread msg. LED flashes
ENABLE
After selecting, press ‘OK’
OK
9
