STATIC IP QUICK SETUP

(You can exit the Setup Menu anytime by pressing the “MENU” key again.) Menu

NAME:

USA01

DHCP:

Disable

ADSL DIALUP: NO

Push “Menu” to enter Setup Mode

Set up the name of the phone (e.g. PI WALNUT)

Skip (Leave as default)

Skip (Leave as default)

User Name

PI WALNUT

777777 09:00:00

IP SHARE : NAT 0. 0. 0. 0

IP ADDRESS : 0. 0. 0. 0

Router IP :

0. 0. 0. 0

Subnet Mask 255.255.255. 0

DNS Server IP: 0. 0. 0. 0

SNTP Server IP: 0. 0. 0. 0

DATE: -- / -- / --

TIME: -- : -- : --

Time Zone GMT + 0:00

Gatekeeper

No

Gatekeeper IP

--- . --- . --- . ---

Ext No (Use G/K)

Menu

Extension No.

Time

• Skip (Leave as default)

Upon Completion, your LEDDisplay should

contain the following information.

Set up Your IP address.

Set up your ISP Gateway Address.

The default value is 255.255.255.0 (Please check with your ISP)

Leave as default. (Please check with your ISP)

Set up SNTP (Simple Network Time Protocol)

This function allow IP Phone to get time from the Internet.

If you do not know how to set this up. Skip to next step.

Set up the date (year/month/day) e.g. 99/11/30

Set up the time (hour:minute:second) e.g. 15:53:20

Set up the Time Zone

If you do not know how to set this up. Skip to next step.

Enable or Disable Gatekeeper by <– or –> key

If you want to use the GK (Gatekeeper) please enable this function.

• Enable or Disable Gatekeeper by <– or –> key

If you want to use the GK (Gatekeeper) please enable this function.

Set up Gatekeeper (GK) IP Address

Gatekeeper IP will be supplied from PI and should be set to 4.38.32.22

To save and exit press “menu” button and then “OK”.

To cancel and exit press “menu” button and then “Cancel”

Q1

Page 21
Image 21
PI Manufacturing Internet Phone user manual Static IP Quick Setup, Adsl Dialup no, User Name