Lexmark MS610, 35ST301 Reports menu, Universal Setup menu, Understanding the printer menus 131

Understanding the printer menus 131

Universal Setup menu

Use	To
Units of Measure	Identify the units of measure.
Inches	Notes:
Millimeters
	• Inches is the US factory default setting.
	• Millimeters is the international factory default setting.
Portrait Width	Set the portrait width.
3–8.5 inches	Notes:
76–216 mm
	• If the width exceeds the maximum, then the printer uses the
	maximum width allowed.
	• 8.5 inches is the US factory default setting. You can increase the
	width in 0.01‑inch increments.
	• 216 mm is the international factory default setting. You can increase
	the width in 1‑mm increments.
Portrait Height	Set the portrait height.
3–14.17 inches	Notes:
76–360 mm
	• If the height exceeds the maximum, then the printer uses the
	maximum height allowed.
	• 14 inches is the US factory default setting. You can increase the
	height in 0.01‑inch increments.
	• 356 mm is the international factory default setting. You can increase
	the height in 1‑mm increments.
Feed Direction	Specify the feed direction if the paper can be loaded in either direction.
Short Edge	Notes:

Long Edge

•Short Edge is the factory default setting.

•Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.

Reports menu

Reports menu

Use	To
Menu Settings Page	Print a report containing information about the paper loaded in trays, installed
	memory, total page count, alarms, timeouts, printer control panel language,
	TCP/IP address, status of supplies, status of the network connection, and other
	information.
Device Statistics	Print a report containing printer statistics such as supply information and details
	about printed pages.