Lexmark 35S0450, 35ST301, 35S0300, 35S0400, 35ST300 IPv6 menu, Understanding the printer menus 136

Understanding the printer menus		136
	Use	To
	Enable DDNS	View or change the current DDNS setting.
	Yes	Note: Yes is the factory default setting.
	No
	Enable mDNS	View or change the current mDNS setting.
	Yes	Note: Yes is the factory default setting.
	No
	DNS Server Address	View or change the current DNS server address.
	Backup DNS Server Address	View or change the backup DNS server addresses.
	Backup DNS Server Address 2
	Backup DNS Server Address 3
	Enable HTTPS	View or change the current HTTPS setting.
	Yes	Note: Yes is the factory default setting.
	No

IPv6 menu

To access the menu, navigate to any of the following:

•Network/Ports > Standard Network > Standard Network Setup > IPv6

•Network/Ports > Network [x] > Network [x] Setup > IPv6

Note: This menu is available only in network printers or printers connected to print servers.

Use	To
Enable IPv6	Enable Internet Protocol Version Six (IPv6) in the printer.
On	IPv6 uses bigger numbers to create IP addresses.
Off	Note: On is the factory default setting.
Auto Configuration	Specify whether or not the network adapter accepts the automatic IPv6
On	address configuration entries provided by a router.
Off	Note: On is the factory default setting.
Set Hostname*	Set the host name.
	Note: The host name is limited to 15 characters, and accepts US‑ASCII,
	alphanumeric characters and hyphen only.
View Address*	View the current IPv6 addresses.
View Router Address*	View the current router address.
Enable DHCPv6	Enable DHCPv6 in the printer.
On	Note: On is the factory default setting.
Off

* These settings can be changed only from the Embedded Web Server.