Lexmark 35S0450, 35ST301 Maintenance kit low 80.xy, Maintenance kit nearly low 80.xy, Memory full

Troubleshooting 199

Load manual feeder with [paper type] [paper size] [paper orientation]

Try one or more of the following:

•Load the multipurpose feeder with the correct size and type of paper.

•Depending on your printer model, touch Continue or press to clear the message and continue printing.

Note: If no paper is loaded in the feeder when Continue or is selected, then the printer manually overrides the request, and then prints from an automatically selected tray.

•Cancel the current job.

Maintenance kit low [80.xy]

You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,

press to confirm.

Maintenance kit nearly low [80.xy]

For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,

press to confirm.

Maintenance kit very low, [x] estimated pages remain [80.xy]

You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Memory full [38]

Try one or more of the following:

•From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer models, press

to confirm.

•Install additional printer memory.