Lexmark 35S0450, 35ST301, 35S0300 Setting Hibernate Timeout, Settings Settings General Settings

Using MS510dn and MS610dn 64

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > > Settings > > General Settings >

2Press the arrow buttons until Press Sleep Button or Press and Hold Sleep Button appears, and

then press .

3Press the arrow buttons until Hibernate appears, and then press .

Notes:

•When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to Hibernate mode.

•When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the printer to Hibernate mode.

Setting Hibernate Timeout

Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Timeouts.

3From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state.

4Click Submit.

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Timeouts > > Hibernate Timeout >

2Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode.

3Press .