Lexmark MS510, 35ST301 Reducing printer noise, Adjusting Sleep mode, Select a setting you want

Using MS510dn and MS610dn			62
	Use	To
	Off	Use the factory default settings for all settings associated with Eco‑Mode. This setting supports the
		performance specifications for your printer.
	Energy	Reduce energy use, especially when the printer is idle.

•Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.

•The printer enters Sleep mode after one minute of inactivity.

Energy/Paper	Use all the settings associated with Energy and Paper modes.
Plain Paper	•	Enable the automatic two‑sided (duplex) feature.
	•	Turn off print log features.

2Press .

Reducing printer noise

Use Quiet mode to reduce the printer noise.

1From the printer control panel, navigate to:

> Settings > Settings > > General Settings > > Quiet Mode >

2Select a setting you want.

Use	To
On	Reduce printer noise.
	Notes:
	• Print jobs will process at a reduced speed.
	• Printer engine motors do not start until a document
	is ready to print. There is a short delay before the
	first page is printed.
Off	Use factory default settings.
	Note: This setting supports the performance
	specifications of the printer.

3Press .

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes.

Note: The printer still accepts print jobs when in Sleep mode.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.