Lexmark 35ST301, 35S0450, 35S0300, 35S0400, 35ST300, MS510DN, MS610DN manual Click Continue Finish

Using MS610de 98

After installing the serial or communication (COM) port, configure the printer and the computer. Make sure you have connected the serial cable to the COM port on your printer.

1Set the parameters in the printer.

aFrom the printer control panel, navigate to the menu for the port settings.

bLocate the menu for the serial port settings, and then adjust the settings, if necessary.

cSave the modified settings, and then print a menu settings page.

2Install the printer driver.

aObtain a copy of the software installer package.

•From the Software and Documentation CD that came with your printer

•From our Web site:

Go to www.lexmark.com, and then navigate to:

SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software installer package

bDo either of the following:

•If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to appear.

If the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

1Click , or click Start and then click Run.

2In the Start Search or Run dialog, type D:\setup.exe.

3Press Enter or click OK.

Note: D is the letter of your CD or DVD drive.

•If you are using the downloaded software installer from the Web, then double‑click the installer that you have saved in your computer. Wait for the Select Installation Type dialog to appear, and then click Install.

Note: If you are prompted to run your software installer package, then click Run.

cClick Install.

dFollow the instructions on the computer screen.

eSelect Advanced, and then click Continue.

fFrom the Configure Printer Connection dialog, select a port.

gIf the port is not in the list, then click Refresh, or navigate to:

Add port > select a port type > enter the necessary information > OK

hClick Continue > Finish.

3Set the COM port parameters.

After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.

Note: Make sure the serial parameters in the COM port match the serial parameters you set in the printer.

aOpen Device Manager.