Lexmark 35S0400, 35ST301, 35S0450, 35S0300, 35ST300, MS610, MS510 Understanding the printer menus 156

Understanding the printer menus		156
	Use	To
	Collate	Stack the pages of a print job in sequence when printing multiple copies.
	(1,1,1) (2,2,2)	Note: “(1,2,3) (1,2,3)” is the factory default setting.
	(1,2,3) (1,2,3)
	Sides (Duplex)	Specify whether prints are on one side or on both sides of the paper.
	1 sided	Note: 1 sided is the factory default setting.
	2 sided
	Duplex Binding	Define binding for duplexed pages in relation to paper orientation.
	Long Edge	Notes:
	Short Edge
		• Long Edge is the factory default setting. Long Edge assumes binding along the
		long edge of the page (left edge for portrait and top edge for landscape).
		• Short Edge assumes binding along the short edge of the page (top edge for
		portrait and left edge for landscape).
	Paper Saver Orientation	Specify the orientation of a multiple‑page document.
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and
	Landscape	landscape.
	Portrait
	Paper Saver	Specify that multiple‑page images be printed on one side of a paper.
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up
	Paper Saver Border	Print a border on each page image.
	None	Note: None is the factory default setting.
	Solid
	Paper Saver Ordering	Specify the positioning of multiple‑page images.
	Horizontal	Notes:
	Reverse Horizontal
		• Horizontal is the factory default setting.
	Reverse Vertical
		• Positioning depends on the number of page images and whether they are in
	Vertical
		portrait or landscape orientation.