Lexmark 35S0450, 35ST301, 35S0300, 35S0400 Erase Temporary Data Files menu, Set Date and Time menu

Understanding the printer menus	145
Use	To
Configure Log	Specify how and whether or not audit logs are created.
Enable Audit	Notes:
Yes
	• Enable Audit determines if events are recorded in the secure audit log and
No
	remote syslog. No is the factory default setting.
Enable Remote Syslog
	• Enable Remote Syslog determines if logs are sent to a remote server. No is the
No
	factory default setting.
Yes
	• Remote Syslog Facility determines the value used to send logs to the remote
Remote Syslog Facility
	syslog server. 4 is the factory default setting.
0–23
	• If the security audit log is activated, then the severity value of each event is
Severity of events to log
	recorded. 4 is the factory default setting.
0–7

Erase Temporary Data Files menu

Erase Temporary Data Files deletes only print job data on the printer hard disk that are not currently in use by the file system. All permanent data on the printer hard disk are preserved, such as downloaded fonts, macros, and held jobs.

Note: This menu appears only when a formatted, working printer hard disk is installed.

Use	To
Wiping Mode	Specify the mode for erasing temporary data files.
Auto
Automatic Method	Mark all disk space used by a previous print job. This method does not permit the file
Single pass	system to reuse this space until it has been cleared.
Multiple pass	Notes:
	• “Single pass” is the factory default setting.
	• Only automatic wiping enables users to erase temporary data files without
	having to turn off the printer for an extended amount of time.
	• Highly confidential information should be erased using only the Multiple pass
	method.

Set Date and Time menu

Use	To
Current Date and Time	Show the current date and time settings for the printer.
Manually Set Date and Time	Enter the date and time.
[input date/time]	Notes:
	• For touch‑screen printer models, date and time are set in YYYY-MM-DD
	HH:MM format.
	• Manually setting the date and time sets Enable NTP to No.
	• For non‑touch‑screen printer models, the wizard lets you set the date and
	time in YYYY‑MM‑DD‑HH:MM format.