Additional printer setup

28

2

1

Note: When the printer software and any hardware options are installed, you may need to manually add the options in the printer driver to make them available for print jobs. For more information, see “Updating available options in the printer driver” on page 29.

To uninstall the optional trays, slide the latch on the right side of the printer toward the front of the printer until it clicks into place, and then remove stacked trays one at a time from the top to the bottom.

Setting up the printer software

Installing the printer software

Notes:

If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.

Close all open software programs before installing the printer software.

1Obtain a copy of the software installer package.

From the Software and Documentation CD that came with your printer.

From our Web site:

Go to www.lexmark.com, and then navigate to:

SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software installer package

2Do either of the following:

If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to appear.

If the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to: Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

aClick, or click Start and then click Run.

bIn the Start Search or Run dialog, type D:\setup.exe.

cPress Enter, or click OK.

Page 28
Image 28
Lexmark 35S0450, 35ST301, 35S0300, 35S0400, 35ST300, MS610 Setting up the printer software, Installing the printer software