Lexmark 35ST301, 35S0450, 35S0300, 35S0400, 35ST300, MS610, MS510 Understanding the printer menus 153

Understanding the printer menus		153
	Use	To
	Timeouts	Set the amount of time the printer waits before it enters Hibernate
	Hibernate Timeout	mode.
	Disabled	Notes:
	1 hour	• “Disabled” is the factory default setting in all countries
	2 hours
		except European Union countries and Switzerland.
	3 hours
		• “3 days” is the factory default setting for all European Union
	6 hours
		countries and Switzerland.
	1 day
	2 days
	3 days
	1 week
	2 weeks
	1 month
	Timeouts	Set the printer to Hibernate mode even if there is an active Ethernet
	Hibernate Timeout on Connection	connection.
	Hibernate	Note: “Do Not Hibernate” is the factory default setting.
	Do Not Hibernate
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning the display to the ready state.
	15–300 sec	Note: “30 sec” is the factory default setting.
	Timeouts	Display a message that lets you reset the screen timeout timer
	Prolong Screen Timeout	instead of returning to the home screen.
	On	Note: Off is the factory default setting.
	Off
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255 sec	Notes:
		• “90 sec” is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535 sec	• “40 sec” is the factory default setting.
		• This setting has no effect on PCL emulation print jobs.

1This menu item appears only in touch‑screen printer models.

2This menu item appears only in non‑touch‑screen printer models.