Lexmark 35ST301, 35S0450, 35S0300, 35S0400 Using Hibernate mode, Settings General Settings Timeouts

Using MS510dn and MS610dn 63

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Navigate to:

Settings > General Settings > Timeouts

3In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.

4Click Submit.

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > > Settings > > General Settings > > Timeouts > > Sleep Mode >

2In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode.

3Press .

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely.

Notes:

•Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode.

•The Hibernate mode can be scheduled. For more information, see “Using Schedule Power Modes” on page 65.

•If the printer is in Hibernate mode, the Embedded Web Server is disabled.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If your are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Sleep Button Settings.

3From the “Press Sleep Button” or “Press and Hold Sleep Button” drop‑down menu, select Hibernate.

4Click Submit.