Using MS510dn and MS610dn

41

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 181 and “Storing paper” on page 118.

Setting the paper size and type

1From the printer control panel, navigate to:

> Settings > > Paper Menu > > Paper Size/Type >

2Press the up or down arrow button to select the tray or feeder, and then press .

3Press the up or down arrow button to select the paper size, and then press .

4Press the up or down arrow button to select the paper type, and then press to change the settings.

Configuring Universal paper settings

The Universal paper size is a userdefined setting that lets you print on paper sizes that are not preset in the printer menus.

Notes:

The smallest Universal paper size is 6 x 127 mm (3 x 5 inches), and is supported only from the multipurpose feeder.

The largest Universal paper size is 216 x 355.6 mm (8.5 x 14 inches), and is supported from all paper sources.

1From the printer control panel, navigate to:

> Settings > > Paper Menu > > Universal Setup > > Units of Measure > > select a unit of measure >

2Select Portrait Width or Portrait Height, and then press .

3Press the left or right arrow button to change the setting, and then press .

Using the standard bin and paper stop

The standard bin holds up to 150 sheets of 75g/m2 (20lb) paper. It collects prints facedown. The standard bin includes a paper stop that keeps paper from sliding out the front of the bin as it stacks.

Page 41
Image 41
Lexmark MS610 Loading paper and specialty media, Setting the paper size and type, Configuring Universal paper settings