Lexmark MS610 Understanding the printer menus 158, Print Area, Download Target, Resource Save

Understanding the printer menus 158

Use

Print Area

Normal

Whole Page

Download Target

RAM

Flash

Resource Save

On

Off

Print All Order

Alphabetical

Oldest First

Newest First

To

Set the logical and physical printable area.

Notes:

•Normal is the factory default setting. When attempting to print data in the non‑printable area defined by the Normal setting, the printer clips the image at the boundary.

•Whole Page allows the image to be moved into the non‑printable area defined by the Normal setting. This setting affects only pages printed using a PCL 5e interpreter and has no effect on pages printed using the PCL XL or PostScript interpreter.

Set the storage location for downloads.

Notes:

•RAM is the factory default setting. Storing downloads in the RAM is temporary.

•Storing downloads in a flash memory or on a printer hard disk places them in permanent storage. Downloads remain in the flash memory or printer hard disk even when the printer is turned off.

•This menu item appears only when a flash or disk option is installed.

Specify how the printer handles temporary downloads, such as fonts and macros stored in the RAM, when the printer receives a print job that requires more memory than is available.

Notes:

•Off is the factory default setting. Off sets the printer to retain downloads only until memory is needed. Downloads are deleted in order to process print jobs.

•On sets the printer to retain downloads during language changes and printer resets. If the printer runs out of memory, then Memory Full 38 appears on the printer display, but downloads are not deleted.

Specify the order in which held and confidential jobs are printed when Print All Order is selected.

Note: Alphabetical is the factory default setting.