Lexmark MS510DN, 35ST301 Finishing menu, Understanding the printer menus 159, Separator Source

Understanding the printer menus 159

Finishing menu

Use	To
Sides (Duplex)	Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
1 sided	Notes:

2 sided

•“1 sided” is the factory default setting.

•You can set two‑sided printing from the software program. For Windows users:

1 Click File > Print.

2Click Properties, Preferences, Options, or Setup. For Macintosh users:

1Choose File > Print.

2Adjust the settings from the print dialog and pop‑up menus.

Duplex Binding	Define the way two‑sided pages are bound and printed.
Long Edge	Notes:
Short Edge
	• Long Edge is the factory default setting. Long Edge binds pages along their long
	edge (left edge for portrait and top edge for landscape).
	• Short Edge binds pages along their short edge (top edge for portrait and left
	edge for landscape).
Copies	Specify the default number of copies for each print job.
1–999	Note: 1 is the factory default setting.
Blank Pages	Specify whether to insert blank pages in a print job.
Do Not Print	Note: Do Not Print is the factory default setting.
Print
Collate	Stack the pages of a print job in sequence when printing multiple copies.
(1,1,1) (2,2,2)	Note: “(1,2,3) (1,2,3)” is the factory default setting.
(1,2,3) (1,2,3)
Separator Sheets	Specify whether to insert blank separator sheets.
Off	Notes:
Between Copies
	• Off is the factory default setting.
Between Jobs
	• Between Copies inserts a blank sheet between each copy of a print job if
Between Pages
	Collate is set to (1,1,1) (2,2,2). If Collate is set to (1,2,3) (1,2,3), then a blank
	page is inserted between each set of printed pages, such as after all page 2's
	and after all page 3's.
	• Between Jobs inserts a blank sheet between print jobs.
	• Between Pages inserts a blank sheet between each page of a print job. This
	setting is useful when printing transparencies or when inserting blank pages in
	a document.
Separator Source	Specify the paper source for separator sheets.
Tray [x]	Note: Tray 1 (standard tray) is the factory default setting.
Multi‑Purpose Feeder