Lexmark 35S0300, 35ST301 manual PostScript menu, PCL Emul menu, Understanding the printer menus 164

Understanding the printer menus		164
	Use	To
	Annotations	Print annotations in a PDF.
	Do Not Print	Note: Do Not Print is the factory default setting.
	Print
PostScript menu
	Use	To
	Print PS Error	Print a page containing the PostScript error.
	On	Note: Off is the factory default setting.
	Off
	Lock PS Startup Mode	Disable the SysStart file.
	On	Note: Off is the factory default setting.
	Off
	Font Priority	Establish the font search order.
	Resident	Notes:

Flash/Disk

•Resident is the factory default setting.

•This menu item is available only when a formatted flash memory option card or printer hard disk is installed and operating properly.

•Make sure the flash memory option or printer hard disk is not read/write‑, write‑, or password‑protected.

•Job Buffer Size must not be set to 100%.

PCL Emul menu

Use	To
Font Source	Specify the set of fonts used by the Font Name menu.
Resident	Notes:
Download
	• “Resident” is the factory default setting. “Resident” shows the factory
Flash
	default set of fonts downloaded in the RAM.
All
	• “Download” shows all the fonts downloaded in the RAM.
	• “Flash” shows all fonts resident in that option. The optional flash memory
	card must be properly formatted and cannot be read/write‑, write‑, or
	password‑protected.
	• “All” shows all fonts available to any option.
Font Name	Identify a specific font and the option where it is stored.
Courier 10	Note: Courier 10 is the factory default setting. Courier 10 shows the font
	name, font ID, and the storage location in the printer. The font source
	abbreviation is R for Resident, F for Flash, and D for Download.