Lexmark MS510 Setting Hibernate Timeout, Settings General Settings Timeouts Hibernate Timeout

Using MS610de 107

3From the “Press Sleep Button” or “Press and Hold Sleep Button” drop‑down menu, select Hibernate.

4Click Submit.

Using the printer control panel

1From the home screen, navigate to:

> Settings > General Settings

2Touch Press Sleep Button or Press and Hold Sleep Button.

3Touch Hibernate > .

Notes:

•When Press Sleep Button is set to Hibernate, press the Sleep button for less than three seconds to set the printer to Hibernate mode.

•When Press and Hold Sleep Button is set to Hibernate, press and hold the Sleep button for more than three seconds to set the printer to Hibernate mode.

Setting Hibernate Timeout

Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Timeouts.

3From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state.

4Click Submit.

Using the printer control panel

1From the printer control panel, navigate to:

> Settings > General Settings > Timeouts > Hibernate Timeout

2Select the amount of time the printer waits after a print job is processed before it enters Hibernate mode.

3Touch .