Lexmark MS610, 35ST301, 35S0450, 35S0300 Linking and unlinking trays, Click Settings Paper Menu

Using MS510dn and MS610dn 50

•Load letterhead faceup with the top edge entering the printer first. For two‑sided (duplex) printing, load letterhead facedown with the bottom edge entering the printer first.

•Load envelopes with the flap on the left side facedown.

Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer.

5From the printer control panel, set the paper size and paper type in the Paper menu to match the paper or specialty media loaded in the multipurpose feeder.

Linking and unlinking trays

Linking and unlinking trays

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer control panel in the TCP/IP section under the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Paper Menu.

3Change the paper size and type settings for the trays you are linking.

•To link trays, make sure the paper size and type for the tray match that of the other tray.

•To unlink trays, make sure the paper size or type for the tray does not match that of the other tray.

4Click Submit.