Lexmark 35S0450, 35ST301 Understanding the printer menus 154, Print Recovery, Press Sleep Button

Understanding the printer menus		154
	Use	To
	Print Recovery	Let the printer automatically continue printing from certain offline
	Auto Continue	situations when these are not resolved within the specified time
	Disabled	period.
	5–255 sec	Note: Disabled is the factory default setting.
	Print Recovery	Specify whether the printer reprints jammed pages.
	Jam Recovery	Notes:
	On
		• Auto is the factory default setting. The printer reprints
	Off
		jammed pages unless the memory required to hold the
	Auto
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.
	Print Recovery	Notes:
	Jam Assist	• On is the factory default setting. On sets the printer to
	On
		automatically dump or partially printed pages to the
	Off
		standard bin after a jammed page has been cleared.
		• Off requires the user to remove all pages from all possible
		jam locations.
	Print Recovery	Let the printer successfully print a page that may not have printed
	Page Protect	otherwise.
	Off	Notes:
	On	• Off is the factory default setting. Off prints a partial page
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.
	Hibernate Timeout on Connection	Set the printer to hibernate mode even there is an active Ethernet
	Hibernate	connection.
	Do Not Hibernate	Note: Do Not Hibernate is the factory default setting.
	Press Sleep Button	Determine how the printer, while in idle state, reacts to a short
	Do nothing	press of the Sleep button.
	Sleep	Note: Sleep is the factory default setting.
	Hibernate
	Press and Hold Sleep Button	Determine how the printer, while in idle state, reacts to a long press
	Do nothing	of the Sleep button.
	Sleep	Note: “Do nothing” is the factory default setting.
	Hibernate

1This menu item appears only in touch‑screen printer models.

2This menu item appears only in non‑touch‑screen printer models.