Lexmark 35ST300, MS610 Setting up and using the home screen applications, Open the command window

Using MS610de 76

Setting up and using the home screen applications

Notes:

•Your home screen may vary depending on your home screen customization settings, administrative setup, and active embedded applications. Some applications are supported only in select printer models.

•There may be additional solutions and applications available for purchase. For more information, visit http://support.lexmark.com or contact the place where you purchased the printer.

Finding the IP address of the computer

Note: Make sure that you know how your printer and computer are connected to the network (Ethernet or wireless).

The computer IP address is required when setting up home screen applications, such as:

•Forms and Favorites

•Multi Send

•Scan to Network

For Windows users

1Open the command window.

In Windows 8

From the Search charm, type run, and then navigate to: Apps list > Run > type cmd > OK

In Windows 7 or earlier

aClick or click Start, and then click Run.

bIn the Start Search or Run dialog, type cmd.

cPress Enter, or click OK.

2Type ipconfig, and then click Go or press Enter.

Note: Type ipconfig /all to see additional useful information.

3Look for IP Address.

The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

For Macintosh users

Note: This is applicable only in Mac OS X version 10.5 or later.

1From the Apple menu, navigate to: System Preferences > Network

2Click Ethernet, Wi‑Fi, or AirPort.

3Click Advanced > TCP/IP.

4Look for IPv4 Address.