Lexmark MS510DN, 35ST301 Network/Ports menu, Active NIC menu, Standard Network or Network x menus

Understanding the printer menus		132
	Use	To
	Network Setup Page	Print a report containing information about the network printer settings, such as
		the TCP/IP address information.
		Note: This menu item appears only in network printers or in printers connected
		to print servers.
	Profiles List	Print a list of profiles stored in the printer.
		Note: This menu item appears only when LDSS is enabled.
	Print Fonts	Print a report of all the fonts available for the printer language currently set in
	PCL Fonts	the printer.
	PostScript Fonts	Note: A separate list is available for PCL and PostScript emulations.
	Print Directory	Print a list of all the resources stored in an optional flash memory card or printer
		hard disk.
		Notes:
		• Job Buffer Size must be set to 100%.
		• Make sure the optional flash memory or printer hard disk is installed
		correctly and working properly.
		• This menu item appears only when a flash or disk option is installed.
	Asset Report	Print a report containing printer asset information, such as serial number and
		model name.

Network/Ports menu

Active NIC menu

Use	To
Active NIC	Notes:
Auto	• Auto is the factory default setting.
[list of available network cards]
	• This menu item appears only when an optional network card is installed.

Standard Network or Network [x] menus

Note: Only active ports appear in this menu. All inactive ports are omitted.

Use	To
PCL SmartSwitch	Set the printer to automatically switch to PCL emulation when a print job requires
On	it, regardless of the default printer language.
Off	Notes:
	• On is the factory default setting.
	• When Off is used, the printer does not examine incoming data. The printer
	uses PostScript emulation if PS SmartSwitch is set to On. It uses the default
	printer language specified in the Setup menu if PS SmartSwitch is set to Off.