Basic Settings
Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier.
Adjusting the Front Speaker Output Balance
SETTING
If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.
On the front panel only:
1. Press SETTING so that the Control %/ Þ/ @/ #buttons work for adjusting the balance.
The lamp above the button lights up.
2. Press Control % / Þuntil “BALANCE” appears on the display.
3.Press Control @ / #to adjust the balance.
• Pressing Control @decreases the right channel output.
• Pressing Control #decreases the left channel output.
Listening at Low Volume (Loudness)
Human ears are not sensitive to bass at low volume. To compensate for this, the loudness function automatically boosts the bass level as you lower the volume.
SETTING | On the front panel only: |
1.Press SETTING so that the Control %/ Þ/ @/ #buttons work for setting the loudness. The lamp above the button lights up.
2.Press Control %/ Þuntil “LOUDNESS” appears on the display.
3.Press Control @/ #to set the loudness function to “ON” or “OFF.”
• Select “ON” to activate the loudness function.
The LOUDNESS indicator lights up on the display.
•Select “OFF” to cancel it. The indicator goes off.
English
Using the Sleep Timer
SETTING
Using the Sleep Timer, you can fall asleep to music and know the amplifier will turn off by itself rather than play all night.
On the front panel only:
1.Press SETTING so that the Control % / Þ/ @/ # buttons work for setting the Sleep Timer. The lamp above the button lights up.
2.Press Control %/ Þuntil “<SLEEP>” appears on the display.
3.Press Control @/ #to set the shut-off time.
Each time you press the button, the
10
20
30
40
50 
60 
70 
80 
0
(Canceled)
Continue to the next page
Page 12
