Selecting different sources for picture and sound
You can watch picture from video equipment while listening to sound from audio equipment.
To listen to the sound from audio equipment while watching the picture from video equipment:
1.Select the video equipment as the source (VIDEO or VCR).
2.Press one of the source buttons for the audio equipment (TUNER, TAPE, PHONO or CD) on the remote control.
Selecting the Front Speakers
|
| When you have connected two sets of front speakers, you can select which to use. Pressing SPEAKERS 1 or |
|
| SPEAKERS 2 activates the respective set of speakers. |
| SPEAKERS | To use the set of speakers connected to the FRONT SPEAKERS 1terminals, press SPEAKERS 1 to set |
1 |
| 2 |
it in the _ON position, and press SPEAKERS 2 to set it in the ÑOFF position.
_ON ÑOFF | To use the set of speakers connected to the FRONT SPEAKERS 2terminals, press SPEAKERS 2 to set |
| |
| it in the _ON position, and press SPEAKERS 1 to set it in the ÑOFF position. |
| To use both sets of speakers, press both SPEAKERS 1 and 2 to set them in the _ON position. |
| To use neither set of speakers, press both SPEAKERS 1 and 2 to set them in the ÑOFF position. |
| Note: |
| When only one set of the front speakers is connected to either the FRONT SPEAKERS 1 or 2 terminals, do |
| not press both SPEAKERS 1 and 2 to set them in the _ON position. If you do, no sound comes out of the front |
| speakers. |
Adjusting the Volume
| MASTER VOLUME | On the front panel: | ||||||
– | + | To increase the volume, turn MASTER VOLUME clockwise. | ||||||
To decrease the volume, turn it counterclockwise. | ||||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| When you turn MASTER VOLUME rapidly, the volume level also changes rapidly. | |
|
|
|
|
|
|
| When you turn MASTER VOLUME slowly, the volume level also changes slowly. | |
|
| |||||||
On the front panel | From the remote control: | |||||||
|
|
|
|
|
|
| To increase the volume, press VOLUME +. | |
|
|
|
|
|
|
| To decrease the volume, press VOLUME | |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
– VOLUME + |
| |
| CAUTION: | |
| Always set the volume to the minimum before starting any source. If the volume is set at its high | |
From the remote control | level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your | |
speakers. | ||
| ||
|
|
English
Muting the Sound
MUTE
From the remote control only:
Press MUTE to mute the sound through all speakers and headphones connected. “MUTE” appears on the display and the volume turns off.
To restore the sound, press MUTE again so that “OFF” appears on the display.
Turn MASTER VOLUME or pressing VOLUME +/– also restores the sound at the previous volume level.
Page 10
