Radio Shack PRO-94 owner manual Unlocking a Single Talk Group ID, Unlocking All Talk Group IDs

L-OUT (S/S)

To lock out an ID, presswhen the ID ap- pears. The ID is locked out, and the next active ID ap- pears.

Unlocking a Single Talk Group ID

1.Hold down L-OUT (S/S) until you hear two short beeps.

2.Repeatedly press 8 or 9 to select the ID you want to unlock.

3.Press L-OUT (S/S). The ID is unlocked, and the next locked ID appears.

4.Press SRC (LIMIT) to resume the scanner’s previ- ously selected function.

Unlocking All Talk Group IDs

Hold down L-OUT (S/S) while searching until you hear two short beeps, then press E (SVC) to unlock all the IDs at once. The scanner beeps twice. Press L-OUT/SSto re- sume the search.

Note: When you unlock all the IDs, the scan list appears. Press SCAN to scan the IDs stored in your scan lists or press SRC (LIMIT) to resume the scanner’s previously se- lected function. For more information about scan lists, see “Using Talk Group ID Lists” on Page 48.

Using Trunk Scanning Scan Delay

Sometimes a user might pause before replying to a transmission. You can set the scanner to hold on an ID for 5 seconds to wait for a reply. That way, the scanner continues to monitor the ID for 5 seconds after the trans- mission stops before resuming scanning.

Press DELAY to turn trunk scanning scan delay on or off. DLY appears when the scan delay is set to on.

Note: If you consistently miss responses even with scan delay turned on, change the default system type or the fleet map being used. See “Scanning Type I and Hybrid Trunked Systems” on Page 51.

46 Trunking Operation