3.HOW TO SETUP (You can exit the setup menu anytime by pressing “MENU” key again.)

A.Menu Setup Con’t

Tone Setting: Default

Dial Type:

PULSE

Dialing Timeout: 6 Second

MAC Address: 00D0E90022E4

Version:

IP Phone V2.40

Menu

UPDATE CHANGES? <OK> OR <Cancel>

Set the Tone among different country tone standard or different brand of PBX.

Select the country or user define.

Set the Dial Type of PSTN

You could use <–, –> key to choose PULSE or DTMF

The function enable when you don’t press any key after the period of time, it will automati- cally dial the number.

Shows the MAC of the machine.

shows the version of the firmware.

When setup complete, press “menu” button again.

Press <OK> to confirm and save the changes or press <Cancel> to canel all changes

Cancel

OK

*You can exit the setup menu anytime by pressing “MENU” key again.

NOTE.1: When setting up “ADSL Dialup” or PPPoE function set to “YES”

ADSL ID:• ID for ADSL Dialup (Internet User Name)

ADSL Password:

• Password for ADSL Dialup (Internet Password)

NOTE.2: When set up “Gatekeeper” function set to “YES”

Gatekeeper IP

--- . --- . --- . ---

Ext No (Use G/K)

GW Prefix(UseG/K)

Set up Gatekeeper (GK) IP Address

Gatekeeper IP will be supplied from PI and should be set to 4.38.32.22

PI will preset Ext No (Extension No.) - Do Not Change This Extension No. act as your VoIP Phone number.

Gateway prefix number can be set(*see warning) if you have already set up the Gatekeeper (GK) IP. Once Gateway (GW) prefix has been set, this IP Phone will register as a Gateway in the Gatekeeper. We do not suggest this function to be used and it should be set blank.

*WARNING: GW Prefix is the Identification or password to your VoIP Phone. By enabling this function, you will have access to VoIP Phone’s PSTN line. But, if someone else have your Prefix, they can access an outside line thru your VoIP Phone and may run up your telephone

bill. GW Prefix has a maximum of 16 digit number.

PI GK (Gate Keeper) can not recognize Internal IP address (i.e. 192.168.XXX.XXX)

If you have to use any IP Sharing (Router), VoIP Phone must be installed in front of Router.

You can connect Router’s WAN port to VoIP Phone’s PC Port for IP Sharing.

Internet

Router’s WAN Port

• LAN IN

• PC OUT

6

Page 6
Image 6
PI Manufacturing Internet Phone user manual Menu Setup Con’t, Pulse