Maxxsonics MAXX-2400HD manual Configuring the Ethernet Network

Configuring the Ethernet Network

MAXX-2400HD provides a number of user settings that configure it for use in a practical network. These will be found on the Configure Network tab shown below.

The NET-1Ethernet port on the server has a unique IP Address. In this way, each server can be identified on the network.

Network Settings Tab

Use the Main Menu selection bar at the top of the server GUI to configure network communication settings.

Click EDIT>CONFIGURE->NETWORK

The screen of Figure 18 is displayed.

Figure 18 - Network Configuration Screen

The server is shipped with a default network Host Name and IP Address. Qualified network engineers may change these configurations to suit your specific network environment. Factory defaults for networking are:

•Network Disabled

•Use DHCP

Disabling the Network [X]

This selection turns the network OFF or ON. The default is Disabled (the box is checked). To Enable the network connection, click the box to un-check it. Disabling the network can be used to deny access to the server from the network for security purposes.

Page 54 MAXX-2400HD Owner’s Manual