Removing Clips Above or Below the Selected Clip
All clips above or below the selected clip can be removed unless a CUED or PLAYING clip is affected. These options will “grey out” if removal is not allowed for this reason.
To Remove All clips above a selected clip:
•Move the cursor over the clip to select it.
•Right click the mouse and select Remove All Above from the pulldown menu.
To Remove All clips below a selected clip:
•Move the cursor over the clip to select it.
•Right click the mouse and select Remove All Below from the pulldown menu.
Inserting HOLD Into a Playlist
The HOLD command inserts a hold (wait) event in a Playlist immediately before the selected clip. The PLAY or JUMP command will restart a Playlist after it has stopped on a HOLD line. The HOLD command is also available in the Playlist Item Context Menu, accessed by
Appending a Playlist (FILE->APPEND)
Make sure the EDIT checkbox is checked in the Playlist View window.
Click
Changing Duration of Clips in Playlist
Make sure the EDIT checkbox is checked in the Playlist View window. Position the cursor over a clip and
1.Hours, Minutes, Seconds and Frames entered as HHMMSSFF 04300102 = 4 Hours, 30 minutes, 1 second, 2 frames
2.Hours, Minutes, Seconds and Frames entered as HH:MM:SS:FF 03:39:41:17 = 3 Hours, 39 minutes, 41 seconds, 17 frames
3.As a whole number along with the special characters H for hours, S for seconds, M for minutes 7H would set 7 hour duration. 31m would set 31 minutes. 15s would set 15 seconds.
NOTE: The Clip duration is affected only within the Playlist, for this event. The duration of the source clip is not changed. Other events containing the same clip are not changed.
Page 66 |