Entering Network Parameters
From the GUI’s main menu bar, Click EDIT>CONFIGURE>NETWORK. The following screen appears. Make sure the basic network parameters have been entered.
Figure 32 - Network Configuration Screen
Disable Network: uncheck
Host Name: (Any name will suffice, but since this name appears on each line of the server’s diagnostic logs, it is a good idea to keep this short.) The name should also be unique from other devices on the network.
If “Use DHCP” if not checked, then enter a fixed IP address compatible with your local subnet. For example,
IP Address: | 192.168.1.20 |
Net Mask: | 255.255.255.0 |
Default Router: | 192.168.1.1 |
The Name Servers and NTP Servers fields provide the information needed to reach the public time servers.
The NTP Servers field contains a list of time servers, either by numeric IP address, or by site name (URL). Entries are separated by spaces.
Page 80 |