Maxxsonics MAXX-2400HD manual Programming GPI Inputs

Programming GPI Inputs

The MAXX-2400HD has 12 General Purpose Inputs, referred to as GPI 1 through GPI 12. Each can be programmed to trigger one of the following events on a channel:

CUE	Cue a clip
JUMP	Cue selected clip for immediate playback (Playlist Mode only)
NEXT	Immediately plays next cued clip in a playlist for playback (Playlist
	Mode only)
PAUSE	Pause a clip
PLAY	Play a clip
RECORD	Start a recording
SELPREV	In Playlist Mode – Navigate to clip above currently selected clip
SELNEXT	In Playlist Mode – Navigate to clip below currently selected clip
STOP	Stop a clip

To program a GPI Input, select EDIT->CONFIGURE->GPI. Figure 17 will display the screen. GPI 1 through 12 are programmable inputs. The checkboxes to the right of each selection represent video channels 1, 2, 3 and 4. GPI 9 is shown with an expanded pulldown for trigger option.

1.To activate a GPI input, select the event from the pulldown the event menu

2.Mark a checkbox for the channel of interest. The event will be triggered when that GPI goes active.

3.Click APPLY to activate.

Figure 17 - GPI Configuration Screen

MAXX-2400HD Owner’s Manual Page 53