Mapping GPO to Playlist Events
The
To Map a Playlist event to a GPO Line, Follow these steps.
A.Select
a.Set the GPO of interest to PLAYLIST mode from the pulldown menu.
b.Set the Channel to video 1, 2, 3 and/or 4 by checking the appropriate box to the right. Click APPLY to activate the settings.
B.Check the EDIT checkbox in the Playlist View of the transport.
C.Place the cursor over a Clip in a Playlist. Right click on the clip. Select EDIT GPO. The GPO Editor (Figure 27 ) appears.
D.Enable the GPO of interest by checking the corresponding ENABLED checkbox.
E.Enter an offset into the Clip to activate the GPO line in the Offset Field. The form of the field is Hours, Minutes, Seconds and frames. ( HH:MM:SS:FF )
F.Enter the Duration for the GPO to remain active in the Duration Field using the same format. Click APPLY to activate the changes.
Figure 26 - GPO Configuration Screen
Page 67 |