Maxxsonics MAXX-2400HD manual Setting the Audio Input Source, Arming Audio Tracks

Setting the Audio Input Source

Select OPTIONS->CONFIGURE from the Channel 1 Transport Window. The Dialog box in Figure

10appears.

•Select an Audio Input by clicking the desired button.

•Click APPLY or OK.

Embedded audio is eight tracks contained in the HD-SDI video stream.

AES/EBU Digital Audio refers to audio input from the optional DXP-1 multi-channel module.

Analog Audio refers to audio input from the optional AXP-3 and AXP-4 multi-channel module.

Arming Audio Tracks

Select OPTIONS->CONFIGURE from the Channel 1 Transport Window.

Refer again to Figure 10 - Channel Configuration Dialog. Under TRACK ARM, Check AUDIO if recording audio is desired. All eight tracks are recorded.

Click APPLY or OK

Setting an Audio Delay Time

Audio tracks can be offset from video in 1 millisecond increments up to +/- one second. The setting is per channel and non-volatile. It applies to playback only, not recording.

You must stop and start the playback to hear the result of a change. This adjustment is made in Transport mode; once set it also applies to Playlist mode on that channel.

Select OPTIONS->CONFIGURE from the Channel Transport Window. The Dialog box in 10 appears.

Click the OUTPUT tab.

Enter a time offset value in the window.

Click APPLY or OK.

Page 40 MAXX-2400HD Owner’s Manual