Maxxsonics MAXX-2400HD manual Audio Module Connections, Control Module CXP Connections

Audio Module Connections

The AXP-3, AXP-4 and DXP-1 multi-channel audio modules provide for connection of audio equipment. Each is a 2-rack space module. Connection is made to the rear panel of MAXX- 2400HD using a 68 pin cable. Figure 3 indicates the audio module’s connectors and their functions.

CAUTION!

Do not plug an audio module into the CXP connection. Damage to the system may occur. The audio connector on the MAXX-2400HD is clearly marked. Connect according to Figure 3. Be certain it is properly connected before applying power.

Connect Audio Module Here

Figure 3 – Audio Module Connection to MAXX-2400HD

Control Module (CXP) Connections

The CXP Module provides connections to the server’s serial ports and its GPI interface using a 68 pin cable. Connect it between the back of the CXP module and the CXP port on the back of the server. Note that there are two cables supplied for initial connection.

CAUTION!!

Do not plug the CXP Module into the AXP audio module connection on the server. Damage to the system may occur. The CXP connector on the MAXX-2400HD is clearly marked. Connect the CXP module per Figure 4. Be certain it is properly connected before applying power.

MAXX-2400HD Owner’s Manual Page 27