Playing a Clip from the GUI
Video Playback can be done on all four channels, individually or simultaneously. The record-
capable channels (1 and 2) can record or play, but not both at once. Follow these steps to play a clip:
Beginning Playback
1.Select FILE>OPEN from the Transport Window of Channel 1, 2, 3 or 4. The Clip Navigator shown in Figure 14 appears.
2.Navigate the folder structure if necessary by clicking on the folders.
3.Select the clip to be play by
4.When the Transport Window indicates Idle Ready, the clip can be played by clicking PLAY.
Figure 14 –
Looping a Clip
Clicking on the LOOP checkbox in the Transport View will cause a clip to loop until LOOP is unchecked, or until STOP is clicked. LOOP may be checked or unchecked before or during playback, but must be changed at least 2 seconds before the end of clip to take immediate effect.
Pausing a Clip
Click PAUSE at any time to pause a clip. Click again to resume. The PAUSE button is the same key as the PLAY button.
Page 46 |