Maxxsonics MAXX-2400HD manual Configuring NTP, Selecting the Time Zone

Configuring NTP

The server GUI is used to set the time zone and to enter the networking parameters. The local GUI must be used, as these configuration screens are not available on the Remote Workstation Interface.

Selecting the Time Zone

Starting at the main menu bar, Click Edit->Configure->Date-Time screen. When “Automatic Updates” is not checked, the Region and Zone lists are enabled. Select your region and then the zone within that region. There may be more than one way to your zone; America/New York, for example, is the same as US/Eastern. Click the APPLY button to activate the settings,

After changing the time zone a Quick Restart must be performed before changes become effective.

Figure 31 - Date/Time Configuration Screen

MAXX-2400HD Owner’s Manual Page 79