Maxxsonics MAXX-2400HD manual Making a Recording from the GUI, Record Configuration Options

Making a Recording from the GUI

Video recordings are made using the Transport View of Channel 1 or 2. These channels can record or play clips, but not both at the same time. Channels 3 and 4 are playback only. The following steps are used to make a recording. Most configuration settings can be skipped once a workflow is established. Channel 1 is used below as an example; all instructions apply equally to channel 2.

Record Configuration Options

If necessary, set Channel 1 and/or Channel 2 to the Transport View. Click FILE->TRANSPORT in the Playlist View to switch to the Transport View.

Setting the Video Bit Rate

Select OPTIONS->CONFIGURE from the Channel 1 Transport Window. The Dialog box in Figure

10appears.

•In the window, enter the desired Video Bit Rate (in Megabits/sec), not to exceed 125. Alternatively, use the up/down arrows to set a number.

•Click APPLY or OK.

Figure 10 - Channel Configuration Dialog

MAXX-2400HD Owner’s Manual Page 39