REFRIGERATOR INSTALLATION
REMOVING, REVERSING AND REPLACING
REFRIGERATOR DOORS (OPTIONAL)
NOTE: See the Parts and Features section to match your model.
TOOLS NEEDED: 10mm
IMPORTANT: Before you begin, turn the refrigerator OFF and unplug it. Remove food and any adjustable door or utility bins from doors.
HOW TO REVERSE DOOR OPENING DIRECTION (when converting from the
1.Removing Refrigerator Door
Remove the top hinge cover (1).
Remove the 3 screws and lift of f the top hinge (2).
Lift the Refrigerator door (3) slightly and remove it.
Pry off the cover (4) using a slotted screwdriver and attach it on the right.
Loosen the screw (5), remove the stoppers (6) and attach them on the left (on the opposite side).
Loosen the pin (7) and remove it.
Lift off the washer (8).
Pry off the cover (9) using a slotted screwdriver and attach it on the right.
2.Removing Freezer Door
Lift the door (10) slightly and remove it.
Loosen the 2 screws (11), the 2 screws (12), and lift off the middle hinge (13).
Take off the base grille (14).
Remove the cap (15) and attach it on the right.
Loosen the 2 screws (16), remove the bottom hinge (17), and attach on the left.
Loosen the 2 screws (18) and attach the stopper (19) on the left side of the base.
3.Removing Refrigerator Handle
NOTE: To assist in installing the handle on the right side, place a small piece of masking tape near the top of the handle before removing.
Grasp the handle tightly with both hands and slide the handle up (1)(this may require some force).
The keyhole slots (2) on the back of the handle allow the handle to separate from the mounting screws (3).
15