REFRIGERATOR INSTALLATION
Use an adjustable wrench to remove the handle mounting screws (3).
Carefully pry off the plug buttons (4).
Install the plug buttons (4) on left side.
Install the handle mounting screw (3) on the right side
Hold the handle so the masking tape is at the bottom.
Align keyhole slots (2) on the top and bottom of the back of the handle with the screws (3) mounted on the front of the door.
Press the handle against the door front, making sure that the screws (3) go into the keyhole slots (2).
Grasping the handle with both hands, press it firmly against the front of the door and slide the handle down (6). This may require some force.
4. Removing Freezer Handle
NOTE: Before start, check handle type in your model.
Handle Type 1
Remove the cap (1) and the 2 caps (2) using a slotted screwdriver.
Loosen the 2 screws (3), take of f the handle (4), and install it on the right.
Attach the caps you removed earlier [figures (1) and (2)].
Handle Type 2
For this handle type is not neccesary remove it.
5. Installing Freezer Door
Install the base grille (1).
Install the door (3) onto the bottom hinge pin.
Install the middle hinge (4) on the opposite side with the screw (5) and the screws (9).
6. Installing Refrigerator Door
Place the washer (6) on the middle hinge pin (7).
Install the door (8) so that it fits onto the middle hinge pin (7).
Install the top hinge (10) with screws.
Reinstall top hinge cover (11).