data
3 – Write; writes intermediate format to output files
This argument is mutually exclusive with
Error log file specification – specifies a file for writing an error log and supplementary error information. The error log receives any error messages that are generated during translation. The process must have write, file create and directory create access to this directory.
If “0” is specified for the path, error messages are not logged. In interactive mode
Configuration file specification. The configuration file indicates the translation types to be performed, and is specified in section 7.2.
Quiet output. This causes only error messages to be displayed. The default is normal output – a small number of informational messages and any error messages.
This argument is mutually exclusive with
Wait time – the number of seconds to wait before rechecking the input file path(s) for work. The default is 30 seconds.
This argument is ignored unless
Verbose output. This causes a large number of informational messages to be displayed as well as any error messages. The default is normal output – a small number of informational messages and any error messages.
This argument is mutually exclusive with
7.2 Configuration File
A configuration file is used to designate the types of translation to be done. Each type of translation type must specify at minimum an OEM format and path for input as well as output, and a work path. The translation type may also include remote DICOM AE information and customization settings.
The configuration file is a text file. Each line of text specifies one directive; the type of each directive is denoted by a leading keyword. The following general rules apply to the configuration file:
; | (semicolon) | Comment – everything to the right on the same line is ignored. |
! | (exclamation) |
|
|
| The semicolon delimiter may be used freely to mark comments; the |
|
| exclamation delimiter is reserved for use by Numa, Inc. |
Page 28 of 33
