Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off (Standby)
On the front panel:
To turn on the power, press POWER. | STANDBY | |||
| ||||
The STANDBY lamp goes off. The name of the | POWER | |||
current source (or station frequency) appears on | ||||
| ||||
the display. |
| |||
| Current source name appears | |||
|
|
| ||
|
|
|
| |
| SPK 1 |
|
| |
| ANALOG L R |
| VOLUME | |
|
|
| ||
| Current volume level is shown here |
| ||
To turn off the power (into standby mode), |
| |||
press POWER again. | STANDBY | |||
The STANDBY lamp lights up. A small amount
of power is consumed in standby mode. To turn | POWER | |
| ||
the power off completely, unplug the AC power |
| |
cord. |
| |
From the remote control: |
| |
To turn on the power, press AUDIO | AUDIO | |
POWER | ||
POWER. | ||
| ||
The STANDBY lamp goes off. The name of |
| |
the current source (or station frequency) |
| |
appears on the display. |
|
To turn off the power (into standby mode), press AUDIO POWER
again. The STANDBY lamp lights up.
DVD MULTI | Select the DVD player for viewing the digital |
| video disc using the analog discrete output mode |
| (5.1 CH reproduction). |
| To enjoy the DVD MULTI playback, see page |
| 27. |
DVD | Select the DVD player. |
VCR | Select the video component connected to the |
| VCR jacks. |
TV SOUND/DBS Select TV sounds (or the DBS tuner). | |
PHONO * | Select the turntable. |
CD * | Select the CD player. |
TAPE/CDR * | Select the cassette deck (or the CD recorder). |
FM/AM * | Select an FM or AM broadcast. |
| • Each time you press the button, the band |
| alternates between FM and AM. |
Notes:
•When connecting a CD recorder (to the TAPE/CDR jacks), and a DBS tuner (to the TV SOUND/DBS jacks), change the source name shown on the display. For details, see page 13.
•When you press one of the source selecting buttons on the remote control marked above with an asterisk (*), the receiver automatically turns on.
Signal and speaker indicators on the display
The signal indicators light up in the following cases:
•Only the indicators for the incoming signals light up.
•When analog input is selected, “L” and “R” always light up.
•When “DVD MULTI” is selected as the source, “L,” “C,” “R,”
“LFE,” “LS” and “RS” light up.
The speaker indicators light up only —:
•When the corresponding speaker is activated.
AND
•When the corresponding speaker is required for the DSP mode selected currently.
Selecting the Source to Play
Press one of the source selecting buttons.
On the front panel:
DVD MULTI |
| DVD |
| VCR |
| TV SOUND/DBS |
|
|
|
|
|
| SOURCE NAME |
|
|
|
|
|
| |
PHONO |
| CD |
| TAPE/CDR |
| FM/AM |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| SOURCE NAME |
|
|
From the remote control:
DVD DVD MUILTI | CD | FM/AM |
TV/DBS VCR TAPE/CDR PHONO
Selected source name appears
DIGITAL AUTO | SPK 1 2 | BASS BOOST INPUT ATT | SLEEP | ||
ANALOG | L | C | R | PROLOGIC DSP H.PHONE AUTOMUTING TUNED STEREO | VOLUME |
LINEAR PCM | S.WFR LFE |
|
| ||
DIGITAL | LS | S | RS |
|
|
CH-
Signal indicators light up in | Speaker indicators light up | ||||
red: |
|
| in white: |
|
|
L | C | R | L | C | R |
S.WFR LFE | S.WFR LFE | ||||
LS | S | RS | LS | S | RS |
|
|
|
|
|
|
L: • When digital input is selected: Lights up when the left
channel signal comes in.
•When analog input is selected: Always lights up.
R: • When digital input is selected: Lights up when the right
channel signal comes in.
•When analog input is selected: Always lights up.
C: Lights up when the center channel signal comes in.
LS: Lights up when the left rear channel signal comes in.
RS: Lights up when the right rear channel signal comes in.
S: Lights up when the monaural rear channel signal comes in. LFE:Lights up when the LFE channel signal comes in.
Notes:
•When “SUBWOOFER” is set to “YES,” S.WFR lights up.
•When you select “DVD MULTI,” all the signal indicators except “S” light up.
10
