Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
Tuning in Stations Manually
On the front panel:
1. Press FM/AM to select the band
Using Preset Tuning
Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.
(FM or AM).
FM/AM
To store the preset stations
The last received station of the selected band is tuned in.
•Each time you press the button, the band alternates between FM and AM.
SPK 1
ANALOG | L | R | TUNED | VOLUME |
Before you start, remember...
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
2.Press FM/AM TUNING 5/ °until you find the frequency you want.
•Pressing FM/AM TUNING 5increases the frequency.
•Pressing FM/AM TUNING °decreases the frequency.
From the remote control:
1.Press FM/AM to select the band.
•Each time you press the button, the band alternates between FM and AM.
FM/AM TUNING
FM/AM
1.Tune in the station you want to preset (see “Tuning in Stations Manually”).
•If you want to store the FM reception mode for this station, select the FM reception mode you want. See “Selecting the FM Reception Mode” on page 19.
| SPK 1 |
|
|
|
ANALOG | L | R | TUNED | VOLUME |
2. Press MEMORY. |
| MEMORY |
|
| |
SPK 1 |
|
|
ANALOG L R | TUNED | VOLUME |
2. Press TUNING +/– until you find |
|
| + |
|
| ||
the frequency you want. |
| TUNING | |
| |||
• Pressing TUNING + increases the |
|
| − |
|
| ||
frequency.
•Pressing TUNING – decreases the frequency.
Note:
When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.
When an FM stereo program is received, the STEREO indicator also lights up.
CH- 
3. Press FM/AM PRESET 5/ °to | FM/AM PRESET | |
| ||
select a channel number while the |
| |
channel number position is flashing. |
| |
SPK 1 |
|
|
ANALOG L R | TUNED | VOLUME |
CH- |
|
|
Note:
You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for the tuner, not for the CD and others. (See page 31.)
4. Press MEMORY again while the | MEMORY |
selected channel number is flashing on |
|
the display. |
|
The selected channel number stops flashing.
The station is assigned to the selected channel number.
SPK 1
ANALOG | L | R | TUNED | VOLUME |
CH-
5.Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored one.
18
