
To change the transmittable signals for operating a CATV converter or DBS tuner
1.Press and hold CATV/DBS POWER.
2.Press CATV/DBS CONTROL.
3.Enter manufacturer’s code using buttons 1–9,
and 0.
See the list to the right to find the code.
4. Release CATV/DBS POWER.
The following buttons can be used for operating the CATV converter or DBS tuner:
CATV/DBS POWER: | Turns on and off the CATV converter |
| or DBS tuner. |
CH | Changes the channels. |
1 – 10, 0, 100+ (+10): | Selects the channels. |
| The 10 button will function as the |
| ENTER button if your equipment |
| requires pressing ENTER after |
| selecting a channel number. |
Note:
Refer to the manual supplied with your CATV converter or DBS tuner.
5. Try to operate your CATV converter or DBS tuner by pressing CATV/DBS POWER.
When your CATV converter or DBS tuner turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or DBS tuner , try each one until the correct one is entered.
Note:
You cannot use both the CATV converter and DBS tuner at the same time.
For CATV converter
Manufacturer | Codes |
GENERAL INSTRUMENT | 06, 07, 08, 09, 10, |
| 11, 12, 13, 14, 29 |
HAMLIN/REGAL | 01, 02, 03, 04, 05 |
JERROLD | 06, 07, 08, 09, 10, |
| 11, 12, 13, 14 |
OAK | 15, 16, 17 |
PANASONIC | 18, 19, 20 |
PIONEER | 21, 22 |
SCIENTIFIC ATLANTA | 23, 24, 25 |
TOCOM | 26 |
ZENITH | 27, 28 |
|
|
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
For DBS tuner | |
|
|
Manufacturer | Codes |
JVC | 56, 57, 67 |
AMSTRAD | 43, 44, 45, 46, 47 |
BLAUPUNKT | 30 |
ECHOSTAR | 50, 51, 67 |
GOLDSTAR | 31 |
GRUNDIG | 32, 33 |
HIRSHMANN | 48, 52, 53, 55 |
INSTRUMENT | 68 |
ITT/NOKIA | 34 |
KATHREIN | 52, 58, 61, 62, 63 |
NEC | 35, 36 |
ORBITECH | 48 |
PHILIPS | 37, 38 |
RCA | 65 |
SAMSUNG | 39, 40 |
SCHWAIGER | 61, 64 |
SIEMENS | 41, 42 |
SONY | 66 |
TECHNISAT | 48 |
|
|
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
35