Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

Activating the DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you have made adjustments, the receiver memorizes the adjustments until you change them. You also need to set the DVD player to the analog discrete output mode.

From the remote control:

 

1. Press DVD MULTI so that “DVD

DVD MUILTI

MULTI” appears on the display.

 

Note:

When you select “DVD MULTI” as the source to play, the DSP mode is canceled, and the SURROUND ON/OFF and DSP MODE buttons do not work.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel:

1. Press DVD MULTI so that “DVD

DVD MULTI

MULTI” appears on the display.

Note:

When you select “DVD MULTI” as the source to play, the DSP mode is canceled, and the SURROUND ON/OFF and DSP MODE buttons do not work.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3. Press SOUND.

SOUND

 

The 10 keys are activated for adjusting the sound.

4.Adjust the speaker output levels.

To adjust the center speaker level, press CENTER +/– (from +10 dB to –10 dB).

To adjust the left rear speaker level, press REAR•L +/– (from +10 dB to –10 dB).

To adjust the right rear speaker level, press REAR•R +/– (from +10 dB to –10 dB).

3.Adjust the speaker output levels.

1)Press ADJUST repeatedly until one of the following indications appears on the display.

“CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

2)Press CONTROL UP 5/DOWN °to adjust the selected speaker output level (from +10 dB to –10 dB).

3)Repeat 1) and 2) to adjust the other speaker output levels.

ADJUST SETTING

CONTROL

DOWN UP

– CENTER+

– REAR• L+

– REAR• R+

2

3

5

6

8

9

 

MENU

 

ENTER

 

 

27

Page 30
Image 30
JVC RX-7010VBK Using the DVD Multi Playback Mode, Activating the DVD Multi Playback Mode, Press DVD Multi so that DVD