Muting the Sound
From the remote control ONLY:
Press MUTING to mute the sound | MUTING |
| |
through all speakers and headphones |
|
connected.
“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).
From the remote control:
Press BASS +/– or TREBLE +/– to adjust the bass or treble sound level (+10 dB to
Attenuating the Input Signal
−BASS +
−TREBLE+
To restore the sound, press MUTING again so that “OFF” appears on the display.
•Turning MASTER VOLUME on the front panel or pressing VOLUME +/– on the remote control also restores the sound.
When the input level of the playing source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal level to prevent the sound distortion.
Reinforcing the Bass
You can boost the bass level.
Press BASS BOOST on the front panel or on the remote control to select the bass boost function.
BASS BOOSTBASSBOOST
On the front panel ONLY:
Press and hold INPUT ATT so that the INPUT ATT indicator lights up on the display.
•Each time you press and hold the button, the Input Attenuator mode turns on (“INPUT ATT ON”) or off (“INPUT NORMAL”).
Notes:
INPUT
ANALOG/DIGITAL
INPUT ATT
On the front panel | On the remote |
| control |
•Each time you press the button, the bass boost function turns on (“BASSBOOST ON”) and off (“BASSBOOST OFF”).
–Select “BASSBOOST ON” to activate the bass boost function. The BASS BOOST indicator lights up on the display.
–Select “BASSBOOST OFF” to cancel it.
The indicator goes off.
Note:
This function affects the front speaker sounds only.
Adjusting the Tone
You can adjust the bass and treble sounds as you like.
Before you start, remember....
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel: |
|
1. Press ADJUST repeatedly until | ADJUST SETTING |
“BASS” or “TREBLE” appears on |
|
the display. |
|
•Select “BASS” to adjust the bass sound level.
•Select “TREBLE” to adjust the treble sound level.
2. Press CONTROL UP 5/DOWN ° CONTROL
DOWN UP
to adjust the bass or treble sound level (+10 dB to –10 dB).
•Each time you press the button, the sound level changes by ± 2 steps.
•This function is available only for the sources connected using the analog terminals.
•This function takes effect when the DSP mode is in use.
•When selecting “DVD MULTI” as the source, this effect does not work.
Adjusting the Subwoofer Output Level
You can adjust the subwoofer output level if you have selected “YES” for the “SUBWOOFER” (see page 14).
Once it has been adjusted, the receiver memorizes the adjustment.
Before you start, remember....
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•When the front speakers are all deactivated, the subwoofer level cannot be adjusted.
On the front panel: |
|
1. Press ADJUST repeatedly until | ADJUST SETTING |
“SUBWFR LEVEL” appears on |
|
the display. |
|
The display changes to show the current setting.
2. | Press CONTROL UP 5/DOWN ° DOWN UP | |
|
| CONTROL |
| to adjust the subwoofer output |
|
| level (+10 dB to |
|
From the remote control: |
| |
1. | Press SOUND. | SOUND |
|
| |
The 10 keys are activated for sound adjustments.
2. Press SUBWOOFER +/– to adjust | ||
the subwoofer output level (+10 dB | 0 | +10 |
| FMMODE | 100+ |
to
12
