JVC RX-7010VBK manual Specifications, Amplifier, Audio, Video

Specifications

Amplifier

Output Power

At Stereo operation:

Front channels:

100 W per channel, min. RMS, driven into 8 Ω, 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion.

At Surround operation:
Front channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
	more than 0.8% total harmonic distortion.
Center channel:	100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
	0.8% total harmonic distortion.
Rear channels	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
	more than 0.8% total harmonic distortion.

Audio			2.7 mV/47 kΩ
Audio Input Sensitivity/Impedance (1 kHz):	PHONO (MM):
	CD, TAPE/CDR, TV SOUND/DBS, VCR, DVD:
			220 mV/47 kΩ
Audio Input (DIGITAL IN)* :	Coaxial: DIGITAL 1	(DVD):	0.5 V(p-p)/75 Ω
	Optical: DIGITAL 2	(CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:	TAPE/CDR, VCR:	220 mV
Digital output:	Optical: DIGITAL OUTPUT
	Signal wave length: 660 nm
	Output level: –21 dBm to –15 dBm
Signal-to-Noise Ratio (’66 IHF/’78 IHF):	PHONO (MM):	70 dB/78 dB (at REC OUT)
	CD, TAPE/CDR, TV SOUND/DBS, VCR, DVD:
		87 dB/67 dB
Frequency Response (8 Ω)	PHONO:	20 Hz to 20 kHz (±1 dB)
	CD, TAPE/CDR, TV SOUND/DBS, VCR, DVD:
		20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization:	±1.0 dB (20 Hz to 20 kHz)
Bass boost:	+3 dB ±1.0 dB at 100 Hz
Tone Control:	Bass (100 Hz):	±10 dB
	Treble (10 kHz):	±10 dB

Video

Video Input Sensitivity/Impedance:
Composite video:	DBS, VCR, DVD:		1 V(p-p)/75 Ω
S-video:	DBS, VCR, DVD:	(Y: luminance):	1 V(p-p)/75 Ω
		(C: chrominance, burst):	0.286 V(p-p)/75 Ω
Video Output Level:			1 V(p-p)/75 Ω
Composite video:	VCR, MONITOR OUT:
S-video:	VCR, MONITOR OUT:	(Y: luminance):	1 V(p-p)/75 Ω
		(C: chrominance, burst): 0.286 V(p-p)/75 Ω
Synchronization:	Negative
Signal-to-Noise Ratio:	45 dB

39