XtremeMac XGC-1e warranty Maintenance / Specifications, Precautions

Maintenance / Specifications

Precautions

1)Please take care in the handling of this precision device. If the unit is dropped or subjected to extreme shock, the calibration may be thrown off. Calibration problems due to abuse, or droppage may affect the warranty.

2)DO NOT expose the XGC-1e to water. It utilizes a ventilated enclosure to properly “sample” the CO2.

Specifications:

System operating voltage Maximum Switching amperage Overload protection Operating temperature Maximum humidity Temperature control range Humidity control range Adjustable timer repeatability Timer setting accuracy Hydro “ON” timer

Hydro “OFF” timer

24-hour timeclock accuracy CO2 Operating principle CO2 Measurement range CO2 Warm-up time

CO2 Maximum drift per year CO2 Accuracy @ 77’F

CO2 Repeatability

CO2 Calibration interval

CO2 sensor Operating life expectancy Dimensions

Weight

Relay operations

120vac +/- 20% @ 50-60 Hertz 15-amps @ 120vac

15-amp normal blow fuse

30-120º F

95% RH (Non-condensing)

50-115º F with a 7º F differential, +/- 3.6º 20 - 80% RH with a 5% differential

+/- .5% under fixed conditions +/- 10%

30 seconds to 20 minutes

12 minutes to 480 minutes +/- 3% monthly

Fuzzy Logic™, w / Single-beam Non-Dispersive Infrared (NDIR) 0 – 5000 PPM CO2

Minimum 10 minutes (full accuracy) +/- 15 PPM

+/- 5% of reading

<1% of Fixed Scale Three years

15 years typical 10” X 8” X 7” Less than 6 lbs.

Minimum 100,000 electrical / 10,000,000 mechanical

Maintenance:

1)Consult the troubleshooting chart for a listing of the most common problems.

2)DO NOT open the enclosure!!! There are no components that require maintenance.

3)Do not use this equipment for purposes other than what it is designed for. It will provide many years of trouble-free service when used properly.

4)In the event you cannot solve the problem, first consult the dealer who sold the unit then contact the factory for instructions on how to return it to the factory for repair.

Published By R & M Supply Inc.

Copyright 2009 R & M Supply

All Rights Reserved.

Liability statement:

R & M Supply and their retailers and distributors are not responsible for any damage or injuries (consequential or otherwise) arising from the use of this device. The purchaser assumes all responsibility for the use and proper installation of this device.