TSX SCP 114 card
30
Driver configuration screens

At a Glance The configuration tool is used to configure the TSXSCP 114 card Uni-Telway driver.

Illustration The screen dedicated to the Uni-Telway driver looks like this:

Description This table describes the different areas which make up the configuration screen:
Link Parameters
Uni-Telway
OK Cancel
TSX SCP114 Configuration
Slave number (Ad0)
Slave
1
Apply
1
2
3
Number Element
1 This window is used to set the standard slave address (Ad0) used by the card.
2 This button is used to recognize the address.
3 This tab is used to access the configuration of transmission parameters.