Schneider Electric Communication Drivers - page 21

Serial port
21
Uni-Telway
parameters The parameters are presented in the following manner:
The Station ID window is used to name the remote device associated with the
driver configuration.
The COM Port window is used to select the communication po rt used.
The Uni-telway Slave Address window is used to enter:
the standard slave address of the driver,
the number of slave addresses used by the driver.
The Modem Communication window is useful when the local station is
communicating via a modem. In this case, this window is used to enter:
the HAYES string to be sent to the modem in order to initialize it,
the call number of the remote device,
the password to be sent to the remote device, if it has been config ured with a lis t
of callers with passwords (e.g. TSXMDM 10 card configured with passwords).
Link Parameters
Station ID
COM Port
Uni-telway Slaves address
Communication Modem
NumberBase
Hayes
Tel No .
Password
Advanced
Uni-Telway
OK
Modem Used
Cancel
Parameters of the Station
[Default]
COM 1
13