Schneider Electric Communication Drivers Driver configuration Press the Configuration button to display the following window: , The table below describes the different commands in the tab "Devices" :

ISAWAY driver
91
Driver
configuration Press the Configuration button to display the following window:
The table below describes the different commands in the tab "Devices" :
Button Action
Add... Allows a T PCX 57 processor card with default parameters (IRQ =10,
base address I/O=H’220’, timer=500ms, buffer size=256 bytes) to be
added to the PC.
The maximum number of cards is 2.
Remove Allows a selected T PCX 57 processor card to be deleted.
Properties Allows the properties of a processor card to be defined, see:
Properties, p.93.
Apply Allows configuration parameters to be applied; the tool saves the
parameters, then reinitializes the driver.
Cancel Allows the user to exit without acknowledging the modified parameters.
OK Allows the user to exit while acknowledging the modified parameters.
Devices Driver
PCX57 Configuration
PCX
Add... Remove Properties
OK Cancel Apply
List of PCX57 card configured:
[1] PCX57 Card