TSX FPC 10 ISA card
64
Procedure To adjust the parameters, proceed in the following manner:
Example of IRQ
selection The interrupt address provided by the system is 10:
Example of
standard
address
selection
The standard address provided by the system is equal to 210 in hexadecimal:
Step Action
1 Set the IRQ interrupt jumper to comply with the address provided by the windows
98 (See How to configure hardware parameters for Windows 98, p.58) or
2000/XP (See How to configure hardware parameters for Windows 2000\XP,
p.60) operating syst ems.
2 Code the standard I/O address provided by the operating system windows 98
(See How to configure hardware parameters for Windows 98, p.58) or 2000/XP
(See How to configure hardware parameters for Windows 2000\XP, p. 60) with
the micro-switches.
Note: The jumper must not be set in the IRQ position.
3
5
10
11
15
IRQ
12345678
ON
200
100
80
40
20
10